|
Your Sport-Prototype & GT Gearboxe
|
Applications
![]() |
![]() |
![]() |
Technical Specifications
- 6 speed dog ring gearbox, with sequential gearing
- Maxi engine torque : 500 N.m (365 lbs/ft)
- 20 mm teeth width (1° to 3°) and 17mm (4° to 6°) - 89 mm shaft centers
- Gear ratios, wide range except 1rst 12x35
- Step-up conical drive (input) : transverse cluster layout
- Drop gear quick access (overall reduction)
- AS7G06 aluminium casings, two possible oil tanks : 6L and 10 L
- Oil pump and internal lubrication system + steel filter
- Self-lockin differential : 3 + 3 discs, several ramp angles
- Clutch shaft : 1" x 23 splines or 1" x 26 splines
- Gearbox selection + pneumatical jack supplied
- "Contactless" barrel position sensor
Endurance 650 N.m Option
- Special steels
- 3MO® CeraFinish : superfinishing option
- TFJ self-locking differential : high torque level
- Specific input shaft
- NEW 2023: internal torsion bar
Options and Accessories
- Bell housing
- Release clutch
- Output flange
Extra informations: :
- the NTV gearbox is designed to fit with a centrifugation clutch : no slave cylinder (even if possible to install : ask)
- The driveshafts must be made bespoke. We recommend Ø28mm maximum.
- Depending on your application and the technical features of your vehicle, an oil cooler is recommended. Usually we recommend a 13-row radiator, 210x98x50mm with AN6 inlet/outlet connections.
- Mandatory to use oil type 85W140.
Ask for your Quote
- This email address is being protected from spambots. You need JavaScript enabled to view it.
- Call us now +00.33.(0)2.43.53.29.39